Performance Comparison of Carbon Fiber Reinforced Polyaryletherketone and Epoxy Multiscale Composites for Structural Applications

Abstract

Polymer matrices reinforced with hybrid multiscale fillers is a promising research area for developing advanced materials for engineering applications. The synergy of multiscale fillers in hybrid composites combines the benefits of individual fillers, like high performance, durability, and lightweight characteristics, while mitigating their shortcomings. High-performance thermoplastic composites are gaining attention as a potential replacement for thermoset composites in structural applications owing to their superior fracture toughness and recyclability. This comprehensive study investigates and compares the mechanical behavior of carbon fiber (CF) reinforced high performance thermoplastic polyaryletherketone (PAEK) and thermosetting epoxy. PAEK and PAEK-CF multiscale composites were prepared by the film stacking method followed by compression moulding. The hand layup technique was used for the preparation of CF reinforced epoxy multiscale composites. Studies revealed that PAEK and PAEK-CF composites possess superior tensile properties, flexural strength, and fracture toughness compared to epoxy and epoxy-CF composites. Further, the interlaminar shear strength and wear resistance were highest for PAEK-CF composites. Wear and fracture surface analysis suggested ductile failure mode for PAEK and PAEK-CF composites, while mode of failure was brittle for epoxy composites. The effect of cryothermal cycling was minimal on the performance of PAEK-CF composites. The failure behavior of the composites from the experimental studies was corroborated with finite element models of fracture toughness using Abaqus/Explicit. The effect of 0.5 to 2 wt.% multiwalled carbon nanotubes (MWCNT) in nano and multiscale epoxy CF composites was analyzed. High-resolution transmission electron microscopy (HRTEM) ascertained the nanofiller dispersion in nanocomposites. The tensile and fracture properties of the composites improved significantly with MWCNT content. Beyond 1 wt.%, the properties declined in both nano and multiscale composites

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced