Multi objective optimization of friction stir welding parameters of dissimilar aluminium alloys

Abstract

Friction Stir Welding (FSW) has emerged as a robust technique for joining both ferrous newlineand non-ferrous materials. However, welding thick aluminium alloys particularly 12 newlinemm plates continues to pose significant challenges due to thermal expansion and newlinecomplex process parameter interactions. This research aims to optimize the FSW process newlinefor thick aluminium alloys by systematically investigating the influence of spindle speed, newlinetraverse speed, tool pin length, and tool pin shoulder position on joint tensile strength. newlineAn initial set of forty trials was conducted to identify suitable values for spindle speed, newlinetraverse speed, and plunging speed, which were subsequently held constant. The study newlinethen focused on varying tool pin length and shoulder position across twelve weldments, newlineresulting in sixty tensile specimens. The experimental results revealed that tool pin length newlineand shoulder position are critical determinants of weld quality, particularly for thick newlineplates of AA6063 and AA5083 alloys. newlineA key innovation of this work is the identification of tool pin shoulder rise (TPSR) as a newlinepivotal input parameter for welding thick aluminium plates. Unlike conventional newlineapproaches for thin plates, TPSR addresses the pronounced thermal expansion in thicker newlinematerials. Its significance was validated through optimization techniques and ANOVA, newlineconfirming its role in enhancing weld integrity. newlineFurther experimentation examined the effect of a 0.18 mm TPSR above the surface of newlinedissimilar aluminium alloys (AA6063-AA5083) on tensile strength, welding newlinetemperature, and micro-hardness. Using the L9 Taguchi method, trials were conducted newlineand simulated via ABAQUS software. The primary input parameters spindle speed, newlinetool pin length, and traverse speed were analyzed using ANOVA, and optimal newlinecombinations were determined through Grey Relational Analysis (GRA). newlineTo predict welding outcomes, mathematical models were developed using Multi newlineVariable Regression Modeling (MVRM) and Response Surface Methodology (RSM). newlineThese models achie

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced