Shear Strengthening Of Rc Beams Using Deep Embedded Bars Numerical And Experimental Investigations

dc.contributor.guideNayak, Amar Nath
dc.coverage.spatial
dc.creator.researcherDutta, Baisali
dc.date.accessioned2025-01-15T04:15:55Z
dc.date.available2025-01-15T04:15:55Z
dc.date.awarded2024
dc.date.completed2024
dc.date.registered
dc.description.abstractnewline In the past few decades, the strengthening of existing reinforced concrete (RC) structures with fibre-reinforced polymers (FRP) has been accepted by international construction practice because of its high specific strength, corrosion resistance and easy installation. In response to the growing number of RC members with structural deficiencies, numerous FRP shear-strengthening solutions that are feasible, affordable, and long-lasting have been brought forward. Externally bonded (EB) sheets and near-surface mounted (NSM) bars are two techniques of shear retrofitting systems for RC beams using FRPs. However, the premature de-bonding of FRP sheets or strips in EB and NSM techniques is a significant drawback even after proper anchoring of the FRPs. Therefore, few researchers have suggested the deep embedment (DE) or embedded through section (ETS) method of retrofitting using FRP or steel bars for RC beams in order to overcome the aforementioned drawback. The literature review reveals that numerous researchers have studied the structural response of RC beams retrofitted employing EB and NSM techniques, but researches on the response of RC beams shear retrofitted with DE technique are scanty. Further, most of these investigations was done using experimental works. Moreover, a thorough knowledge from the researches of shear strengthening of RC beams employing DE-FRP bars with different parameters affecting the shear strength is very much essential. Further, the effect of different types of beams, i.e., simply supported, continuous and cantilever beams retrofitted with DE-FRP bars, on shear strength is to be studied thoroughly by the researchers for practical applications. newlineThe above information impresses the author to fill some of the above research gaps. Accordingly, the objective of the current research is to investigate numerically the structural response of simply supported, continuous and cantilever beams shear retrofitted employing DE FRP/steel bars, and to examine the efficiency DE technique over EB
dc.description.note
dc.format.accompanyingmaterialDVD
dc.format.dimensions
dc.format.extent
dc.identifier.researcherid
dc.identifier.urihttp://hdl.handle.net/10603/614779
dc.languageEnglish
dc.publisher.institutionDepartment of Civil Engineering
dc.publisher.placeSambalpur
dc.publisher.universityVeer Surendra Sai University of Technology
dc.relation
dc.rightsuniversity
dc.source.universityUniversity
dc.subject.keywordEngineering
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering Civil
dc.titleShear Strengthening Of Rc Beams Using Deep Embedded Bars Numerical And Experimental Investigations
dc.title.alternative
dc.type.degreePh.D.

Files

Original bundle

Now showing 1 - 5 of 14
Loading...
Thumbnail Image
Name:
01_title.pdf
Size:
179.46 KB
Format:
Adobe Portable Document Format
Description:
Attached File
Loading...
Thumbnail Image
Name:
02_prelim pages.pdf
Size:
1.41 MB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
03_content.pdf
Size:
322.42 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
04_abstract.pdf
Size:
151.25 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
05_chapter 1.pdf
Size:
443.7 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description: