Experimental investigation on metallurgical and mechanical characteristics of TIG welded AA5052 aluminium alloy using different filler materials
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
A major requirement of the modern automobile and aerospace
newlineindustries is weight reduction and improved efficiency. Weight reduction of
newlineautomobiles is one of the promising approaches for increasing fuel economy,
newlineas studies show that with a weight reduction of 10%, the fuel economy
newlineimproves by 6 8%. It is reported that aluminium (Al) is found to be a better
newlinealternative to steel in various applications. Al-series alloys such as 5xxx, 6xxx
newlineand 7xxx, etc. are available, which may differ from each other based on their
newlinealloying elements. Welding of Al is widely employed in the aerospace,
newlineautomotive and shipbuilding industries. Among the various welding
newlineprocesses, Tungsten Inert Gas (TIG) welding plays a major role in the
newlinewelding of Al alloys, titanium (Ti) and Stainless Steel (SS), which are
newlinedifficult to weld by other welding processes. Hot cracking is one of the
newlinecommon problems faced during welding of Al alloys. Hot cracking takes
newlineplace at high temperatures and mainly depends on alloy system formation. In
newlinegeneral, hot cracking is classified into solidification cracking occurring in the
newlineFusion Zone (FZ) and liquation cracking occurring in the Partially Melted
newlineZone (PMZ). Hot cracking resistance is influenced by the welding process,
newlinewelding process parameters and weld metallurgy.
newlineMost of the researchers have investigated the weldability of Al alloys
newlinein various welding processes. Based on the literature survey, it is found that
newlinethe TIG welding process is the most suitable welding process for thin
newlinematerials. In this research work, the 5xxx series of Al alloys were selected as
newlinea base material, since they are widely used for automotive and aerospace
newlinestructures due to their good extrudability, weldability and excellent corrosion
newlineresistance. The weldability of these alloys using the TIG welding process is
newlinefacing hot cracking and weld defects due to the selection of improper weld
newlineprocess parameters. Hence, it is very necessary to overcome these problems to
newlineattain better weld quality joints.
newline