Development and Characterization of Hybrid Polymer Matrix Nano Composites

dc.contributor.guideManjunatha L H
dc.coverage.spatial
dc.creator.researcherAnilkumar, P R
dc.date.accessioned2024-01-31T09:36:41Z
dc.date.available2024-01-31T09:36:41Z
dc.date.awarded2022
dc.date.completed2022
dc.date.registered2017
dc.description.abstractIn the recent years, due to demands on high performance engineering materials, the industry has to change the needs of metallic materials with polymer materials. The change leads to many advantages and reduction of cost. Now a day the polymer based composite materials are most popular tribo-engineering materials and are invariably used in automotive and other industries due to lower densities, high stiffness to weight ratio and high strength to weight ratio as compared to traditional engineering materials. In order to reduce the cost of fabrication and to make them light weight composite material, nano materials were added as reinforcements with the polymer. newlineIn this thesis, whole spectrum of graphene nano silica reinforced epoxy composites were presented an attempt is made to study the potential uses nano materials as reinforcements with the epoxy. The focus of the research is divided into four steps. The first step deals with the preparation of nano composite. The second step deals with the physical and mechanical properties of the prepared composite material. The third step presents the dynamic mechanic analysis while final step reveals the tribological properties and SEM analysis of worn-out surfaces. The Dynamic mechanical analysis is dealing under single and dual cantilever modes. The tests were carried out according to the ASTM standards. newlineWater absorption and thickness swelling behaviour of graphene and nano silica reinforced epoxy composite was investigated. The results show that thickness swelling (TS) has a similar trend as the water absorption and thickness swelling is increasing as the nano silica content was increased and the sample with higher thickness swelling indicates higher water absorption. Mechanical properties were observed experimentally. A general trend was observed. It was clearly viewed that mechanical properties are increasing with the increase in content of nano silica from 0% wt. to 16% wt. and then a starts decreasing beyond 16% nano silica content. Dynamic mechanical analysis was per
dc.description.note
dc.format.accompanyingmaterialDVD
dc.format.dimensions
dc.format.extent103
dc.identifier.urihttp://hdl.handle.net/10603/543027
dc.languageEnglish
dc.publisher.institutionDepartment of Mechanical Engineering
dc.publisher.placeBelagavi
dc.publisher.universityVisvesvaraya Technological University, Belagavi
dc.relation
dc.rightsuniversity
dc.source.universityUniversity
dc.subject.keywordEngineering
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering Mechanical
dc.titleDevelopment and Characterization of Hybrid Polymer Matrix Nano Composites
dc.title.alternative
dc.type.degreePh.D.

Files

Original bundle

Now showing 1 - 5 of 12
Loading...
Thumbnail Image
Name:
01_title.pdf
Size:
199.94 KB
Format:
Adobe Portable Document Format
Description:
Attached File
Loading...
Thumbnail Image
Name:
02_prelim pages.pdf
Size:
319.58 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
04_abstract.pdf
Size:
6.1 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
05_chapter 1.pdf
Size:
319.44 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
06_chapter 2.pdf
Size:
691.21 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description: