Determination of the Influence of Various Occlusal Materials and Abutment Connections on Stresses Transmitted to the Implant supported Prostheses and Implant Bone Interface An In Vitro Study

Abstract

Background of the study newlineThe periodontium of the natural teeth acts as a force absorption element between the tooth and the bone. Implants do not have this advantage and therefore the lack of periodontium results in greater stress. newlineAim and Objective newlineThe purpose of this study is to identify the stresses at the implant bone interface by various occlusal materials with two different abutment connections on short implants. The study also focuses on determination of optimal crown to implant ratio in short implants. Objectives are as follows newlineTo determine newlinewhich occlusal material creates least stress at the implant-bone interface the combination of occlusal material and abutment connection that transmits least stress the stress at the implant bone interface with increased clinical crown height. newlineMaterials and Methods newlinePhase I newlineBone mimicking PMMA models are prepared and implants are placed. Crowns of various occlusal materials are cemented. Strain gauge analysis done using universal testing machine. Stress values are recorded. Statistical analysis done. newlinePhase II newlineThe study is done using 3D FEA. A bone model, two different implant models of same dimensions the abutment models and six different crown models were fabricated and subjected to static load in axial and oblique directions and the von misses stresses were evaluated. newlinePhase III newlineThe study is carried out with 3D FEA. Implant model and crown models of three different heights were subjected to static load. Von misses stresses and principal maximum and minimum values were tabulated and subjected to statistical analysis. newlineResult newlineIn Phase I stresses at the IBI were high with rigid materials. In phase II stresses at the IBI was least when a combination of friction fit abutment and more resilient materials were used. In Phase III stresses at the IBI were not influenced by increase in crown height. newlineCONCLUSION newlineThe study conclude that short implants with friction fit abutments and resilient occlusal materials and increased crown height transmits less stress at IBI. newline

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced