Cutting performance and wear characteristics of PVD and CVD coated tools in machining of hard materials
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The advanced machining operations employed in the engineering applications pays attention to achieve superior quality products combined with higher productivity. The term quality of the components encompasses various characteristics such as dimensional accuracy, surface finish, etc. They are dependent on other various characteristics of machining such as cutting force, torque, tool wear, tool temperature and so on. Subsequently, influence on the economy of machining and denotes the machining performance of the product with minimum environmental impact. Surface roughness plays vital role on mechanical properties of a product developed and other related characteristics such as tribological property during its service life. Thus, its evaluation finds great significance in machining industries. Hard machining is the process of machining operation employed on materials of hardness with 15 or greater than 15 HRC. They are considered under the category of difficult-to-cut alloys. The conventional machining of such alloys includes, rough turning, heat treatment and followed by grinding operation. Whereas hard machining operation eliminates the multiple stages of machining and secondary finishing operations before and after heat treatment. Also, products with comparative dimensional accuracy and quality can be produced with hard machining process.
newlineThe current research work in the thesis presents an experimental investigation on hard machining characteristics of EN8 steel with different types of tools. The hard machining operations employed in the study are drilling of EN8 steel with different hardness viz.
newline15 HRC, 20 HRC and 25 HRC work material and turning of hardened EN8 steel with 25 HRC hardness work material. The PVD coated HSS drills were employed in the study for drilling operations. Whereas CVD coated ceramic and uncoated ceramic tool inserts were employed during hard turning process. The adhesive strength, hardness, EDAX analysis of coating and coating thickness of coated tools were studied to understand their ch