processing characterization and wear response of rattan fiber reinforced polymer composites
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Recently, the world is facing a serious problem on developing proper methods of
newlinedecomposing the solid wastes through different chemical processes with minimal energy,
newlinewhich are actually not cost-effective and may subsequently produce harmful gases during
newlinethe processes. This environmental issue has forced the scientists and material designers
newlineto focus considerable attention in the development of recyclable and biodegradable
newlinecomposite materials. With low cost and high specific mechanical properties, natural fiber
newlinerepresents a good renewable and biodegradable alternative to the most common synthetic
newlinereinforcement such as glass/carbon fibers In the current study, an attempt has been made
newlineto develop natural fiber composite materials from ratan fiber (RA) in two thermoplastic
newlinepolymers, namely polyvinyl alcohol (PVA) and polyethylene terephthalate (PET).
newlineDuring the course of the experimental work, different surface modifications (i.e.
newlineAlkaline, Benzoylation, Permanganate, Sodium Chlorite and Acrylic Acid), were given
newlineto ratan fiber to improve the compatibility and strong interfacial adhesion with the matrix.
newlineOut of different treatments, it was observed that acrylic acid treated RA fiber was the
newlinebest one on the basis of maximum tensile strength. Various weight percentages (e.g.,
newline10%, 20%, 30%, and 40%) of randomly oriented short Acrylic Acid treated RA fibers
newlinewere reinforced with PVA and PET matrices to fabricate RA/PVA and RA/PET
newlinecomposites. 24 wt% and 20 wt% are the optimum fiber loading in PVA and PET matrices
newlineBy applying regression analysis in the tensile test results of both the composites,
newlineoptimum weight percentages of fibers for maximum strength (i.e. 24% for RA/PVA and
newline20% for RA/PET composites) were obtained. For both composites, various properties
newlinesuch as static and dynamic mechanical properties, biodegradability, and rheological,
newlinethermal, and tribological (abrasion and erosion) properties have been studied, and the
newlineresults are presented and discussed.
newline
newline