Investigation of effects on the properties of high strength low alloy steel for various percent nickel content and powder metallurgy parameters

dc.contributor.guideRanganath G
dc.coverage.spatialInvestigation of effects on the properties of high strength low alloy steel for various percent nickel content and powder metallurgy parameters
dc.creator.researcherJoshua gnana sekaran J
dc.date.accessioned2020-09-18T05:36:39Z
dc.date.available2020-09-18T05:36:39Z
dc.date.awarded28/02/2019
dc.date.completed2019
dc.date.registeredn.d.
dc.description.abstractPowder metallurgy (P/M) is familiarly known as one of the main critical manufacturing processes for making numerous industrial products. The production of powder metallurgy component has been expanding at a significantly faster rate because of the advantages associated with it. The reward includes compositional flexibility, minimized segregation, and ability to produce graded microstructures with varying physical and mechanical properties. This will improve quality, precision, productivity, optimized material utilization and hence reduction in cost. The primary objective of this present research work is to develop the HSLA steels. The powder mix of High Strength Low Alloy Steel (HSLA) steels prepared from the elemental powders such as nickel, manganese, chromium, and molybdenum. Three different compositions of AISI 4340 steel powders were mixed in a potmill, and a universal testing machine prepared the cylindrical green compacts at a pressure level of 560MPa. The green compacts sintered in two different sintering atmospheres such as argon and hydrogen. Sintering in hydrogen environment was carried out by passing 250 ml hydrogen per minute. The dew point of hydrogen is -40ºC. After sintering, the sintered samples are cooled at the rate of 45 to 50oC per minute. Density measurements, mechanical properties evaluation and wear resistance properties were studied in the sintered HSLA steels. HSLA P/M steels specimens sintered in hydrogen atmosphere have exhibited better-sintered density (19% improvement in green density), reaching 96-97% theoretical density. However, argon atmosphere sintered steels exhibited a minimum density of 6.533 g/cc (82% theoretical density), which is approximately 5% density increase from its green condition. Lower aspect ratio 0.50 preforms have shown better densification characteristics than newline
dc.description.note
dc.format.accompanyingmaterialNone
dc.format.dimensions21cm
dc.format.extentxviii, 120p.
dc.identifier.urihttp://hdl.handle.net/10603/299881
dc.languageEnglish
dc.publisher.institutionDepartment of Mechanical Engineering
dc.publisher.placeChennai
dc.publisher.universityAnna University
dc.relationp.109-119
dc.rightsuniversity
dc.source.universityUniversity
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering
dc.subject.keywordEngineering Mechanical
dc.subject.keywordalloy steel
dc.subject.keywordnickel content
dc.titleInvestigation of effects on the properties of high strength low alloy steel for various percent nickel content and powder metallurgy parameters
dc.title.alternative
dc.type.degreePh.D.

Files

Original bundle

Now showing 1 - 5 of 14
Loading...
Thumbnail Image
Name:
01_title.pdf
Size:
52.56 KB
Format:
Adobe Portable Document Format
Description:
Attached File
Loading...
Thumbnail Image
Name:
02_certificates.pdf
Size:
1.12 MB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
03_abstracts.pdf
Size:
41.87 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
04_acknowledgements.pdf
Size:
43.62 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
05_contents.pdf
Size:
52.29 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description: