Development of Environment Friendly Additives in Water Based Drilling Fluid

Abstract

Conventional additives refer to chemicals commonly employed in the base fluid while conducting drilling operations. However, these additives can have detrimental effects on the environment by contaminating the soil and groundwater, ultimately endangering natural habitats. Therefore, in this research, the utilization of Grewia optiva fibre powder and litchi leaves powder as additives in water-based drilling fluid was investigated. The effectiveness of these newly developed additives was compared to conventional chemical additives commonly used in the oil industry. Grewia optiva fibre powder, with a particle size of 250 and#956;m (60 US Mesh Size), was used as a Non-Invasive fluid additive (NIFA) in water-based drilling fluid to minimize reservoir damage and enhance hydrocarbon productivity. The experimental findings of this study demonstrated that the incorporation of stem peels powder of Grewia optiva (SPPGO) into the drilling fluid, followed by hot rolling at 100°C for 18 hours, resulted in a significant reduction of fluid invasion into the formation. Specifically, under 500 psi pressure, the invasion of fluid was reduced by 56.3% compared to the base mud. Furthermore, the existing Non-Invasive Fluid Additive (NIFA) demonstrated a reduction in invasion by 52.7% compared to the base mud. newlineIn another study, Grewia Optiva fibres powder (GOFP) with a particle size of 125 µm was employed as a filtration loss controlling agent in drilling fluid. The Grewia Optiva mud samples were subjected to hot rolling at 100 °C for 16 hours. It was observed that the addition of 5% concentration (w/v) of GOFP resulted in a significant reduction of low pressure - low temperature (LPLT) filtration loss in the drilling mud, amounting to 72.5% under a differential pressure of 100 psi. Comparative analysis was conducted with market-available products such as carboxy methyl cellulose-low viscosity grade (CMC-LVG) and Polyanionic cellulose-low viscosity grade (PAC-LVG). The addition of 1.4% (w/v) of CMC-LVG and PAC-LVG to the reference mud led to

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced