Modified clay treated rubber as potential replacement of fine aggregate in concrete for structural applications

Loading...
Thumbnail Image

Date

item.page.authors

Journal Title

Journal ISSN

Volume Title

Publisher

Abstract

In recent times, large quantities of tyre rubber are generated as waste due to the increase in population and vehicle usage. Disposal of tyre rubber remains to be a major environmental concern around the world. The crumb rubber can be used as aggregates in concrete for effectively recycling the tyre rubber. Use of crumb rubber can significantly reduce the mechanical properties of concrete such as compressive strength, split tensile strength and flexural strength. The main reason for this strength reduction is due to the poor bond performance of rubber with cement paste. Still, a number of research works are on progress to improve the strength properties of concrete by enhancing the bonding of rubber with cement paste through various rubber treatments. The elastic modulus of crumb rubber is low that makes the rubberized concrete more ductile. Moreover, crumb rubber has high energy under static as well as dynamic loading. newlineIn this research work, a novel method of rubber treatment with modified clay is proposed and the efficiency of the treatment was examined through Scanning Electron Microscopy (SEM) test. The fine aggregate was partially replaced with crumb rubber at 0%, 5%, 10% and 15% by volume. The Supplementary Cementitious Materials (SCM) such as silica fume at 0%, 5%, 10%, 15% and 20% and ground Granulated Blast Furnace Slag (GGBS) at 30% by weight were used as a partial replacement for cement. The experimental works were carried out in four phases. In the phase I, the optimum concrete mix was arrived by considering the parameters such as the rubber content, treatment of rubber and silica fume content through compressive strength test. newline

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced