Analytical Approximation of Roll Separating Force In Bar Rolling
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
quotRolling is the process which is widely used in such a manner that more than 95% of ferrous and non-ferrous metals are processed by this method. The bars with different types of cross section are the product of bar rolling process, which is carried out above recrystallization temperature i.e. hot rolling. The load acting on the rollers during rolling which tries to separate them is known as roll separating force. The critical parameter associated with the roll separating force in bar rolling makes its prediction a difficult task. However, many researchers have tried to develop analytical formulae based on theories of flat rolling. The comparative studies found in the literature prove it inefficient to predict the roll separating force.
newlineBy observing the research gap, the analytical formula for roll separating force is developed considering the metal bar as an equivalent rectangle. The slab analysis method is used by considering sticking and slipping friction condition before and after the neutral plane, respectively. The flow stress value is an important parameter and highly depends on the temperature. By considering the possibility of the heat losses due to conduction and convection, the equation for temperature difference is presented to correct the temperature during rolling process. An equation for empirical factor q is proposed to be used in calculation of temperature loss. The roll separating force directly depends on the projected contact area between the roller and metal. Therefore, it is necessary to predict its value accurately. But the condition of three dimensional deformation, spread during the process and friction makes it a difficult task. The Sinel Nikove s formula is used to predict the contact area in rolling process. The form co-efficient n_f used in this formula is corrected based on experimental data available in the literature. Considering all these parameters a step by step methodology is proposed to calculate the roll separating force, at the end of chapter 3.
newlineThe set of experimental d