Experimental investigation and optimization of hybrid aluminium metal matrix composites

Abstract

The wear behaviour of AA6063 and AA7075 hybrid composites newlinereinforced with varying percentages (0, 2.5, 5, 7.5, 10) of TiO newline 2 newline and Al newline 2 newline O newline 3 newline was investigated. The study revealed that the wear rate decreased with the newlineaddition of reinforcement particles, reaching its lowest for a 10% newlinereinforcement in AA6063 and 7.5% in AA7075. Wear rates ranged from newline0.0134 g to 0.0170 g across different loads (10 N to 50 N), with a slight newlineincrease observed at higher loads due to potential saturation of protective newlinemechanisms. Wear rates exhibited a fluctuating trend with temperature, newlineshowing a general increase with higher temperatures. Similarly, wear rates newlineincreased with higher sliding velocities and distances, indicating that lower newlinetemperature, velocity, and distance are preferable for minimizing wear. The newlinecoefficient of friction (COF) generally decreased with higher reinforcement newlinepercentages, lower loads, velocities, temperatures, and shorter sliding newlinedistances. However, an increase in COF was noted beyond certain newlinereinforcement percentages. Worn surface morphology showed significant newlinedeformation and microcracking, with superior ductility and a protective newlinetribofilm in AA6063 composites. In comparison, AA7075 composites newlinedemonstrated better wear resistance and lower COF values than AA6063, newlinewith optimal performance at specific reinforcement percentages and newlineoperational conditions. Overall, the addition of TiO newline 2 newline and Al newline 2 newline O newline 3 newline improves newlinewear resistance and reduces friction in both AA6063 and AA7075 newlinecomposites, with AA7075 showing superior wear performance. newline

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced