Fabrication and characterization of the AA6061 T6 AA7075 T6 multistack build using friction stir additive manufacturing for structural and ballistic applications
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
In recent years, the surface composites have greatly impacted the aerospace, energy
newlineand construction sectors. Friction Stir Processing (FSP) and Friction Stir Additive Manufacturing
newline(FSAM) can manufacture high-quality surface composites from lightweight
newlinematerials. This research optimizes the process parameters of FSP and FSAM utilizing
newlinethe design of experiments (DoE) statistical quality tool in order to build sound surface
newlinecomposites. ANOVA was used to validate the actual and projected models. Optimized
newlineprocess parameters were used to perform the experimental run to modify the surface
newlineproperties of FSPed AA7075 and AA 6061. Enhanced microstructural and mechanical
newlinebehavior opens the path to analyze the ballistic properties of FSPed build. The
newlinescaling law technique was utilized to determine the thickness of the build as 18 mm
newlineand thus decided to build a five alternative layers of AA6061-T6/AA7075-T6 multistack
newlinebuild can obstruct the bullet travelling at a speed of 720 m/s. Initially, reduced
newlineGraphene Oxide (rGO), Multi-Walled Carbon Nanotubes (MWCNTs), Aluminum Oxide
newline(Al2O3), and hexagonal Boron Nitride (hBN) used as single and hybrid reinforcements
newlineto fabricate the FSPed AA7075-T6 and AA6061-T6 surface metal matrix composites
newline(SMMCs). Detailed morphological and mechanical characterizations revealed
newlinethat rGO outperformed other reinforcements due to its superior characteristics, such
newlineas enhanced dispersion and improved load transfer efficiency. Based on these findings,
newlinerGO was identified as the optimal reinforcement and subsequently utilized in fabricating
newlineFSAM builds. Morphological examinations were conducted using optical microscopy
newline(OM), scanning electron microscopy with energy dispersion spectroscopy (SEM with
newlineEDS) and Transmission Electron Microscopy (TEM) to verify that there are no defects
newlinein the multistack build and also the drop on grain size of 0.51±0.79 and#956;m helps in achieving
newlineto attain better mechanical performance than the base materials. The reduction of
newlineintermetallics were identified in microstructures