Numerical Simulations and Analysis of Heterojunction Tunnel Field Effect Transistor for Low Power and HighSpeed Applications

dc.contributor.guideSharma, Rajnish and Madan, Jaya
dc.coverage.spatial
dc.creator.researcherMinaxi Dassi
dc.date.accessioned2021-11-17T10:02:18Z
dc.date.available2021-11-17T10:02:18Z
dc.date.awarded2021
dc.date.completed2021
dc.date.registered2017
dc.description.abstractTunnel Field Effect Transistors (TFETs) have proved themselves as a better choice for the replacement of MOSFETs due to provision of scalability and possibility of better realization of goal to achieve subthreshold swing (SS) less than 60mV/decade. However, certain constraints are required to be resolved so as to improve the performance of TFET in terms of higher ON current (ION) and lower threshold voltage (Vth). In this thesis, performance of TFET has been studied and efforts have been made to overcome these major challenges. newlineTo achieve the set of objectives, source material engineering (SME) scheme has been implemented to form a staggered type II heterojunction at the source channel junction by replacing the source material of a conventional TFET by a relatively low band gap material. That way, magnesium silicide/silicon (Mg2Si/Si) heterojunction is formed at the source channel interface of a double gate (DG) TFET. MSH-DG-TFET is proposed and all the simulation results obtained for the proposed device are compared with conventional silicon source DG-TFET (SS-DG-TFET). Silvaco Atlas TCAD simulator has been used to perform all the simulations. To authenticate the work done, all the models implemented during simulation, especially nonlocal band to band tunneling model (i.e., most important model for TFET) is calibrated with already reported experimental work. It is analyzed that the proposed MSH-DG-TFET displayed superior performance by achieving higher ION, reduced Vth and steeper SS as compared to SS-DG-TFET. MSH-DG-TFET obtained ION of 2.5 x 10-4 A/and#956;m, Vth of 0.26 V and SS of 10.05 mV/decade while SS-DG-TFET obtained ION of 1.5 x 10-6 A/and#956;m, Vth of 1.15 V and SS of 19.85 mV/decade. Thus, the performance parameters especially lower Vth and reduced SS achieved by the proposed device MSH-DG-TFET makes it eligible for low power and high performance analog applications. newline
dc.description.note
dc.format.accompanyingmaterialDVD
dc.format.dimensions
dc.format.extent
dc.identifier.urihttp://hdl.handle.net/10603/347821
dc.languageEnglish
dc.publisher.institutionFaculty of Electronics
dc.publisher.placeChandigarh
dc.publisher.universityChitkara University, Punjab
dc.relation
dc.rightsuniversity
dc.source.universityUniversity
dc.subject.keywordEngineering
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering Electrical and Electronic
dc.titleNumerical Simulations and Analysis of Heterojunction Tunnel Field Effect Transistor for Low Power and HighSpeed Applications
dc.title.alternative
dc.type.degreePh.D.

Files

Original bundle

Now showing 1 - 5 of 11
Loading...
Thumbnail Image
Name:
80_recommendation.pdf
Size:
115.51 KB
Format:
Adobe Portable Document Format
Description:
Attached File
Loading...
Thumbnail Image
Name:
certificate.pdf
Size:
129.6 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
chapter _1.pdf
Size:
1010.83 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
chapter_2.pdf
Size:
1.52 MB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
chapter_3.pdf
Size:
828.64 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description: