Development of engineering and novel materials based chemiresistive sensors for detection of air pollutants

dc.contributor.guideGhosh, Ruma
dc.coverage.spatial
dc.creator.researcherGuruprasad, Gorthala
dc.date.accessioned2024-09-13T06:04:58Z
dc.date.available2024-09-13T06:04:58Z
dc.date.awarded2024
dc.date.completed2024
dc.date.registered2019
dc.description.abstractThe awareness of the population about the importance of Air Quality Monitoring (AQM) is increasing. This is because, the pollutants are toxic in nature and are causing several health hazards as has been indicated by agencies like World Health Organization (WHO). Air pollution is caused due to the toxic gases emitted by the industries, automobile emissions, and fossil fuel burning. Hence, developing portable and inexpensive sensors for these obnoxious and toxic gases is critical as they need to be mounted abundantly at multiple locations. This work focuses on sensing three air pollutants such as nitrogen dioxide (NO2), ammonia (NH3), newlineand carbon monoxide (CO). newlineResistive sensors can be miniaturized, are CMOS compatible, and with emergence of chemical routes of synthesis of sensing layers, can be developed in cost-effective way. In this research, seven different types resistive sensing layers were synthesized and tested for three air pollutants - NO2, CO, and NH3. The research began by developing three different types of intrinsic materials (transition metal dichalcogenides (TMDs), MXenes, and semiconducting polymers) based sensors. Two TMDs, molybdenum disulfide (MoS2) and tungsten disulfide (WS2) were synthesized using liquid exfoliation methods. MoS2 was observed to exhibit 2.82 to 39.8% response for 3 to 150 ppm of the NO2 at room temperature. The TMD was found to be highly selective and very fast with response time and recovery times found to be not more than 10 seconds for any concentration of NO2. WS2, another TMD was found to exhibit good sensitivity towards NO2 and CO at room temperature and its response varied from -11.9 and -27.4% and -3.4 and -35.3%, for 2 to 10 ppm of CO and NO2, respectively. The number of layers present in WS2 was found to modulate the response, selectivity, speed, and reusability of the sensor. MXenes are emerging as an excellent sensing material. Hence, this research an attempt to synthesize Mo2C nanoflakes using a simple technique was made. newline
dc.description.note
dc.format.accompanyingmaterialDVD
dc.format.dimensions30 cm
dc.format.extentxxiv, 97 p.
dc.identifier.urihttp://hdl.handle.net/10603/589008
dc.languageEnglish
dc.publisher.institutionDepartment of Electrical Engineering
dc.publisher.placeDharwad
dc.publisher.universityIndian Institute of Technology Dharwad
dc.relation
dc.rightsuniversity
dc.source.universityUniversity
dc.subject.keywordAir quality monitoring
dc.subject.keywordChemiresistive sensors
dc.subject.keywordCO sensors
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering Electrical and Electronic
dc.subject.keywordNanomaterials for air pollutants detection
dc.subject.keywordNO2 sensors
dc.titleDevelopment of engineering and novel materials based chemiresistive sensors for detection of air pollutants
dc.title.alternative
dc.type.degreePh.D.

Files

Original bundle

Now showing 1 - 5 of 12
Loading...
Thumbnail Image
Name:
01_title.pdf
Size:
48.03 KB
Format:
Adobe Portable Document Format
Description:
Attached File
Loading...
Thumbnail Image
Name:
02_prelims page.pdf
Size:
70.27 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
03_content.pdf
Size:
47.89 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
04_abstract.pdf
Size:
50.13 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
05_chapter 1.pdf
Size:
125.25 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description: