Mechanical and microstructural properties of concrete using aloe barbadensis miller and musa X paradisiaca as bio selfcuring agents
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The long-term sustainability of concrete depends upon its
newlineenvironmental impact and durability. In order to improve the strength and
newlinedurability of concrete, the curing process is crucial. The absence of traditional
newlinecuring methods during the initial stages of construction has been identified by
newlineresearchers as a contributing factor to long-term economic losses. Self-curing
newlineconcrete is a recent concrete variation that has the capacity to hold onto water,
newlinereduce surface moisture loss, and aid in the internal curing processes. The
newlinepresent chemical compound, polyethylene glycol, that is used for self-curing is
newlineexpensive. Determining the effectiveness of bio admixtures as self-curing
newlineagents that is, Musa x paradisiaca and Aloe barbadensis miller is the goal of
newlinethis study. The performance of these bio admixtures was then compared to that
newlineof polyethylene glycol (PEG). All of these bio admixtures include functional
newlinegroups that match those in polyethylene glycol (PEG). The results show that
newlineM30 grade of fresh and hardened concrete properties performs better than both
newlinewater-cured concrete and concrete that has PEG added to it.
newlineThe optimal admixture proportions for Aloe barbadensis miller are
newline0.25%, Musa x paradisiaca is 1.0%, and PEG is 0.5%. These proportions lead
newlineto increases in compressive strength of 23.3%, 1.7%, and 4.5%, respectively.
newlineThe slump values are also showing similar dosages of admixtures in optimum.
newlineIn the same way, the tensile and flexural strength of Aloe barbadensis miller
newlinehave been seen to increase to 4.24 MPa and 15.05 MPa, respectively. Similarly,
newlineMusa x paradisiaca has greater values of 13.65 MPa for flexural strength and
newline3.82 MPa for tensile strength. Different specimens, including cubes, cylinders,
newlineprisms, and beams, were constructed and cast to undergo durability testing after
newlinebeing cured. Following the determination of the optimal value, the study is then
newlineexpanded to assess the durability properties.
newline