Experimental and numerical investigation of thermal performance of wavy microchannel heat sink with ceramic based nanofluids
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Microchannels are capable of drawing intense heat from source
newlinewithout degradation and offer consistent fluid flow performance. Typically,
newlineflow channels with hydraulic diameter greater than or equal to 1 mm are
newlineclassified as microchannels and are variably termed in different studies
newline(Hetsroni 2005 and Mokrani et al. 2009) as micro-device or microtubes .
newlineTheir high surface to volume ratio makes them capable of transmitting heat
newlineand mass in crucial applications such as cooling of photovoltaic cells,
newlinechemical reactors, thermic piping systems, microelectronic circuitry, engine
newlineradiators, laser apparatus cooling systems, hydrogen fuel cells and avionics
newline(Hugan et al. 2018). The present work investigated the influence of
newlinenanofluids over the improvement heat transfer characteristics by developing
newlineRectangular, Triangular, Semi-circular and Conical frustum shaped headers
newlineand vertical/inline flow inlet configurations with wavy microchannel.
newlineThe flow distribution studies have been performed by considering
newlinethe influence of the channel header shape and the configuration of the fluid
newlineflow. The corresponding cross sections were formed by varying the width of
newlineheader. The coolant used is the de-ionized water. Physical testing was
newlineperformed for all the inlet headers when the de-ionized water was supplied
newlinewith different mass flow rates. Two influencing flow parameters such as
newlineNormalized flow rate and Flow non-uniformity factor (and#61542;) were selected for
newlinequantifying the maldistribution. CFD analysis was carried out to predict the
newlinecoolant flow performance with respect to different header shapes and inlet
newlineentry arrangement. A numerical model was developed using mathematical
newlineequations to describe the coolant fluid flow behavior inside the wavy
newlinemicrochannels. The fluid was assumed as three dimensional, Newtonian, and
newlineincompressible and laminar flow. While using rectangular header, for the
newlinemass flow rate of 610 g/min, the flow became stable and most of the test runs
newlineshowed a value near to 1 as an indication of proper flow distribution. For
newline