Enhancing CO2 absorption using nanofluids a combined experimental and machine learning approach

dc.contributor.guideDandotiya, Devendra Singh
dc.creator.researcherDevakki, Basavaraj
dc.date.accessioned2025-11-11T10:18:59Z
dc.date.available2025-11-11T10:18:59Z
dc.date.awarded2025
dc.date.completed2025
dc.date.registered2021
dc.description.abstractCarbon dioxide (CO2) is a major greenhouse gas contributing to global warming. In response to international climate goals, including net-zero emission targets by 2035, efficient CO2 capture technologies are critical. This research investigates the use of nanofluids to enhance CO2 absorption and develops a machine learning model for accurate prediction of absorption capacity. Nanoparticles were characterized using Scanning Electron Microscopy (SEM) to determine their size and morphology. Nanofluids were prepared using deionized (DI) water as the basefluid and nanoparticles of ZnO, TiO2, SiO2, Fe2O3, Al2O3, and MWCNT. Experiments were conducted using a custom-fabricated stainless steel 316L absorption cell, based on the direct contact absorption method. Nanofluid concentrations of 0.03, 0.06, 0.09, and 0.12 wt% were tested under initial CO2 pressures of 5, 7.5 and 10 bar. The effects of nanoparticle type, concentration, and pressure on CO2 absorption were evaluated. Results showed a clear enhancement in absorption with the use of nanofluids. An increase in the concentration of nanofluid, enhances the CO2 absorption capacity. However, there exists optimum concentration, any increase further, decreases the absorption capacity. The optimum concentrations were found to be: 0.09 wt% for TiO2 and SiO2, 0.06 wt% for ZnO and Fe2O3. The best CO2 absorption performance was found at 0.12 wt% for Al2O3 nanofluid and 0.03 wt% for MWCNT nanofluid among the tested concentrations. From the results, it was found that there was an increase of 8.07%, 14.23% and 17.21 % at 5, 7.5 and 10 bar initial pressure, respectively for Al2O3 nanofluid at 0.12 wt%, an increase of 10.3%, 18.67% and 13.61% at 5, 7.5 and 10 bar initial pressure respectively for SiO2 nanofluid at 0.09 wt%, an increase of 17.84%, 23.9% and 25.85% at 5, 7.5 and 10 bar initial pressure respectively for TiO2 nanofluid 0.09 wt%, an increase of 17.9%, 20.98% and 25.4% at 5, 7.5 and 10 bar initial pressure respectively for ZnO nanofluid at 0.06 wt%, an increase of 21.03%...
dc.format.accompanyingmaterialDVD
dc.format.extentxx, 121 p.
dc.identifier.researcherid0000-0002-2341-6557
dc.identifier.urihttp://hdl.handle.net/10603/672993
dc.languageEnglish
dc.publisher.institutionSchool of Engineering
dc.publisher.placeIttagalpura
dc.publisher.universityPresidency University, Karnataka
dc.rightsuniversity
dc.source.universityUniversity
dc.subject.keywordCO2 Absorption Capacity
dc.subject.keywordDirect Contact Method
dc.subject.keywordEngineering
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering Mechanical
dc.subject.keywordMachine Learning
dc.subject.keywordNanofluids
dc.subject.keywordRelative Absorption Index
dc.subject.keywordZeta Potential
dc.titleEnhancing CO2 absorption using nanofluids a combined experimental and machine learning approach
dc.type.degreePh.D.

Files

Original bundle

Now showing 1 - 5 of 14
Loading...
Thumbnail Image
Name:
01_title.pdf
Size:
91.09 KB
Format:
Adobe Portable Document Format
Description:
Attached File
Loading...
Thumbnail Image
Name:
02_prelim pages.pdf
Size:
1.1 MB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
03_content.pdf
Size:
306.42 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
04_abstract.pdf
Size:
130.94 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
05_chapter 1.pdf
Size:
794.25 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description: