Forming Analysis of Polymer Sheets

Abstract

The engineering application of polymers has increased with industrial newlinedevelopment because of advancements in polymer processing. Injection molding, newlineextrusion molding, rotational molding, and thermoforming are the different types of newlinepolymer processing techniques, mostly used in the industries. Thermoforming is the newlinesimplest and highly utilized polymer processing technique, which is used to produce newlineproducts with small to very high surface to volume ratio. Thermoforming applications newlinerange from daily household disposable items to high-end fighter jet canopy. In the case newlineof the thermoforming process, forming temperature and contact conditions are the most newlinedominant processing parameters which govern the process output. Therefore, the newlinepresent work is focused on the investigation of optimum forming temperature during newlineprocessing and the effect of contact conditions on optical products in term of final newlinethickness distribution. The initial investigation concentrates on the heat transfer during newlinethe thermoforming processing. Transparent hemispherical domes were formed from the newlinePMMA sheets using non-contact (pressure/vacuum thermoforming) and contact newlinethermoforming processes. Numerical and experimental techniques were used to newlineinvestigate the heat transfer during the thermoforming process. It was observed that the newlinenumerical approach could be adopted for the thermal evaluation of the thermoforming newlinesetups where direct thermal measurement is not possible. newlineThe effect of contact conditions (thermal and mechanical) on the final thickness newlineof the dome was further evaluated. By examining the thermal contact conductance and newlinecoefficient of friction; thermal and mechanical interactions were studied. Two different newlinesetups were built to investigate the thermal and mechanical interactions.The effect of newlinetemperature and pressure on contact conditions was studied. Furthermore, a numerical newlinestudy was performed to understand the effect of change in contact conditions on the newlinethickness distribution of the dome. FEM simulations with constant and variable

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced