A Critical Study of Applicability of Fused Deposition Modelling Technique in EDM Electrode Fabrication
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
newline Abstract
newlineThe importance of the rapid tooling (RT) and the additive manufacturing (AM) appears
newlineto be indispensable to boost the process of manufacturing and expand the horizon of
newlineproduction technology worldwide. Basically, the products and all the factors related to it are
newlineclosely influenced by the manufacturing processes, techniques, materials, purposes and their
newlineuses. To generate the actual physical model from the concept level to the final products of
newlinenewer designs are most often worked out now in a computerized environment. Different AM
newlinetechniques make it easier and consuming less time to prepare the prototype model without
newlineusing tools, jigs or fixtures or human intervention so that manufacturing lead time can be
newlinereduced to a large extent. In this work, fused deposition modeling (FDM), one of the AM
newlineprocess is adopted to fabricate an electro discharge machining (EDM) electrode prototype.
newlineThe plastic prototype is coated with copper to use it as an electrode for electrical
newlinedischarge machining (EDM) process. The thickness of the copper layer of about 1000 microns
newlineby depositing copper on the FDM built ABS plastic part is obtained through thick
newlineelectroplating. The copper coated EDM electrode is used to conduct experiments.
newlineExperiments are designed based on design of experiment approach. Similar experiments have
newlinealso been conducted using a solid copper electrode. The important parameter considered for
newlinethe experimentation i.e. current, voltage, pulse on time and pulse off time. The design of
newlineexperiment was applied on the data; total 81 combinations were considered for the testing of
newlinerapid prototype electrode. The performance parameters measured are material removal rate,
newlinetool wear rate and surface finish. The results of this testing compared with the results of using
newlineconventional solid tools.
newlineThe results of experiment of rapid prototype tool were used for the development of
newlineprediction system. The mathematical modelling was applied on the available data. The
newlineprediction of materi