Design and analysis of power efficient flip flop and its application in nanometre technology

Abstract

The global consumer electronics market is expanding at a rapid rate. Due to a rise in device complexity, speed, and density, power dissipation has become a significant issue for the semiconductor industry. The requirement for lower power Very Large Scale Integration (VLSI) circuits is driven by both technological and commercial requirements. Flip-Flop (FF) is one of the most important and vital element in the design of digital circuits. Switching power accounts for roughly 90% of power consumption in CMOS designs and 75% of overall power consumption in a system-on-chip. Five different types of D flip-flops are investigated in this work. These types are single edge triggered flip-flop, dual edge triggered flip-flop, pulse triggered flip flop, sense amplifier based flip-flop and self-gated flip-flop. All the types were individually studied with its counterpartand#8223;s chapter wise. Single edge, dual edge, pulse triggered and sense amplifier flip-flops are simulated in Tanner EDA SPICE tool at 32 nm CMOS technology node whereas self-gated flip-flop was simulated in HSPICE at 16 nm length and in CMOS and beyond CMOS devices like the graphene nano ribbon, carbon nanotube, FinFET. Performances of flip-flops were analyzed based on area, speed and power. Three new flip-flop designs are proposed specifically targeting power efficient applications. Among these three novel flip-flop designs, two are sense amplifier based flip-flop and one a self-gated flip-flop. To ascertain the circumstances where the proposed design should be used, extensive simulations were performed. In proposed design 1, at nominal operating conditions, power consumption is reduced by 14% and at maximum voltage of 1.1 V by 10%, the overall reduction of 8.3% in Power Delay Product (PDP) is observed at nominal voltage. At 100 MHz of frequency, the power consumption is reduced by 15%. In terms of data activities, the power at 100% activity is reduced by 14.2%, at 75% activity by nearly 12%. The proposed design 2 achieved a reduction of minimum 22.67% in power

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced