Water Disinfection Studies using Hybrid Process of Photocatalysis and Photo Fenton in Fixed Mode
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Contamination of water resources by pathogenic bacteria and associated diseases is a major source of concern for water quality worldwide. Contamination by pathogens is a severe problem that affects all kinds of water bodies, making its identification and understanding important. Advanced oxidation processes (AOPs) such as photo-Fenton and TiO2 photocatalysis have achieved promising applications for the disinfection of wastewater. Yet, both of them have a few limitations such as prolonged treatment time, catalyst separation, electron-hole recombination, iron sludge formation, and higher H2O2 dose which have hindered their effective implementation at the field scale. Therefore, considerable attention has been paid in the present work to explore the practical applications of AOPs by resolving almost all of the issues raised by these individual processes (photocatalysis or photo-Fenton). Attempts were made to combine these two processes within the same treatment unit for the increased disinfection of targeted bacteria, i.e., E. coli. This hybrid technique effectively covers the shortcomings of both technologies ( photocatalysis + photo-Fenton) due to the presence of a higher amount of OHo . To execute the hybrid process, a low-cost and visibly active Feand#8722;TiO2 composite was fabricated using industrial waste materials such as foundry sand (FS) and fly ash (FA) (iron source) mixed with clay in the ratio of 2:1:1. A thin film of TiO2 was coated on spherical composite beads leading to photocatalysis and iron leaching from the composite, leading to photo-Fenton thus incorporating a hybrid effect in one system. For the lab-scale trials inactivation of E. coli was carried out under artificial UV light. Operating parameters such as UV light intensity, size of beads, the addition of oxidant, change in pH, and area/volume ratio of the reactor was optimized for the inactivation of E. coli. In the hybrid process, 6.2 E. coli log reduction was observed in 90 min of reaction time.