Investigations on improving the machining performances in micro turning of ti 6al 4v
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Micro turning is a mechanical micromachining technique, widely used for the
newlinemanufacturing of micro shafts, micro pins, biomedical and dental implants, etc., with
newlinefeature sizes ranging from 1 500 and#956;m. Ti-6Al-4V alloy is used for many applications,
newlinedue to its biocompatibility, high strength to weight ratio and superior mechanical
newlineproperties. However, Ti-6Al-4V is considered as a difficult to machine alloy due to the
newlinelow thermal conductivity, chemical affinity to the tool materials, spring back effect, etc.
newlineIn the case of micromachining, as the minimum uncut chip thickness becomes
newlinecomparable with the cutting edge radius, the size effect becomes influential, resulting in
newlinea non-linear variation in the specific cutting energy. Thus, the micro turning of Ti-6Al-
newline4V alloy is associated with rapid tool wear, resulting in poor surface finish. The majority
newlineof the studies reported in the past, focused on understanding the process mechanics, the
newlineinfluence of size effect phenomenon, optimizing the cutting parameters, etc., on soft
newlinematerials such as brass, magnesium, aluminium, etc. Recent studies on the micro turning
newlineof Ti-6Al-4V, involved analytical and finite element modelling of the machining process,
newlinefor the prediction of machining forces and surface roughness. In the current study, tool
newlinewear prediction for micro turning and strategies to improve the machining performances
newlinein the micro turning of Ti-6Al-4V, such as application of minimum quantity lubrication
newline(MQL) and cutting tool texturing for micro turning applications, under different cutting
newlineconditions were investigated.
newlineTool wear models are widely employed in the analytical prediction and finite element
newlinesimulation of cutting tool wear in conventional machining. However, for the tool wear
newlineprediction in micro turning, calibrated tool wear models are not available.
newline