Formability and Failure Response of AA5052-H32 Sheets Deformed using a Shock Tube

dc.contributor.guideSahoo, Niranjan and Narayanan, R. Ganesh
dc.coverage.spatialMechanical Engineering
dc.creator.researcherBarik, Saibal Kanchan
dc.date.accessioned2023-01-13T05:43:33Z
dc.date.available2023-01-13T05:43:33Z
dc.date.awarded2022
dc.date.completed2022
dc.date.registered2014
dc.description.abstract"The emerging interest to minimize fuel consumption and carbon emission, lightweight component design has become one of the important goals in the automotive industries. Among the lightweight materials, aluminium alloys are used significantly in automotive body construction because of their acceptable strength to weight ratio, toughness, ductility, and corrosion resistance. However, the limitations include the moderate formability in the conventional sheet forming processes at room temperature and significant springback during stamping of complex geometries. Thus, improving the formability of aluminium alloys receives much attention in the stamping industries. Generally, warm forming and high-velocity forming are preferred to improve the formability of aluminium alloys. However, heating metals during deformation imposes an additional cost to the forming operation. Thus, various high-velocity forming processes are in demand because the inertial effect developed during these processes that delays necking by developing additional tensile stress outside the neck resulting in enhanced formability. In the recent past, various high-energy rate forming (HERF) processes such as electro-magnetic forming (EMF), electro-hydraulic forming (EHF) and explosive forming (EF) have been preferred to fabricate net-shaped products without any defects. Despite several advantages of HERF processes, the major limitations are the higher capital cost, difficulties in machine handling, and requirement of skilled persons."
dc.description.noteNot Available
dc.format.accompanyingmaterialNone
dc.format.dimensionsNot Available
dc.format.extentNot Available
dc.identifier.urihttp://hdl.handle.net/10603/444883
dc.languageEnglish
dc.publisher.institutionDEPARTMENT OF MECHANICAL ENGINEERING
dc.publisher.placeGuwahati
dc.publisher.universityIndian Institute of Technology Guwahati
dc.relationNot Available
dc.rightsself
dc.source.universityUniversity
dc.subject.keywordEngineering
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering Mechanical
dc.titleFormability and Failure Response of AA5052-H32 Sheets Deformed using a Shock Tube
dc.title.alternativeNot available
dc.type.degreePh.D.

Files

Original bundle

Now showing 1 - 3 of 3
Loading...
Thumbnail Image
Name:
01_fulltext.pdf
Size:
6.55 MB
Format:
Adobe Portable Document Format
Description:
Attached File
Loading...
Thumbnail Image
Name:
04_abstract.pdf
Size:
92.41 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
80_recommendation.pdf
Size:
411.8 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description: