A comparative study and optimisation in the preheated machining of 2507 duplex stainless steel
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Duplex stainless steels are considered to the most important materials
newlinein the engineering field. Duplex Stainless Steels display high corrosive
newlineresistance in chloride environments due to their high level content of
newlineMolybdenum, Chromium and Nitrogen. Hence they are frequently used in
newlinepiping systems, vessels for chloride-containing media in the chemical
newlineindustry and in high corrosive environment. Duplex Stainless Steels are
newlineconsidered as one of the most tough and hard to machine materials and
newlinevarious difficulties are associated during the machining of Duplex Stainless
newlineSteels like poor surface roughness, tool wear, and chip breaking. The
newlineinformation taken from literatures show that machining and cutting
newlineparameters are essential for the dry turning of 2507 steel grades. This research
newlinework provides good information about the study of machining of Duplex
newlineStainless Steel during turning operation.
newlineDuplex Stainless Steel 2507 was selected as the work piece for dry
newlineturning operation. Machining was done using two type of tool inserts namely
newlinePolycrystalline cubic boron nitride and ceramic inserts under various heat
newlinetreatment methods like Infrared (IR), Ultraviolet (UV), Hot Air (HA) heating
newlineand normal machining. Cutting speed, feed rate and depth of cut were taken
newlineas the input parameters and surface roughness, tool wear, cutting force and
newlinecutting temperature were the output responses under different heating
newlinemethods. L16 orthogonal array was used to optimise the outcome machining
newlineparameters machined using PCBN tool insert and L20 orthogonal array was
newlineused to optimise the output responses machined using ceramic
newlineinsert.Response surface methodology was used for optimising the machining
newlineparameters and the same was done using MINITAB software.Regression
newlineanalysis equation was also calculated for all the output responses
newline