Analysis and testing of modified hydraulic semi active damper by magnetorheological approach

Abstract

Vibration control devices are required in many automotive and industrial systems. The traditional hydraulic damper is one of the most famous devices utilized in this era. Vibration mitigation performance of such dampers improves substantially when magnetorheological (MR) fluid is used as a damper fluid and an electromagnetic piston arrangement is introduced inside the damper to produce the magnetic field that is required to activate the MR fluid. Such a damper is known as the magnetorheological damper. The theory of magnetorheology and magnetorheological damper is examined in this work by way of extensive literature review on design principles and state-of-art developments of MR dampers. Performances and applications of MR dampers are investigated and the scope of research work to be done and the methodology to be adopted is decided. newlineInternal electromagnetic coils are used in existing (Conventional) MR dampers but this arrangement leads to specific problems like electric current unavailability in field, clumping, remanence phenomenon and excessive heat formation. To overcome these limitations, an innovative approach to modify the conventional MR damper is suggested. This modification is in the form of an external permanent magnet assembly instead of internal electromagnet. The proposed modified MR damper therefore consists of an external permanent magnet assembly positioned around the MR damper cylinder that has MR fluid inside it. A test rig has been designed and developed to test the conventional and modified MR dampers. Both the MR dampers are tested by changing the MR fluid configuration, excitation frequency, excitation current, and magnetic flux density that is followed by viability check of modified MR damper. The magnetorheological effect on the above-mentioned parameters and damper behavior is studied with the help of extensive experimental results in the form of Force-Velocity characteristics. The magnetorheological effects on conventional and modified MR dampers are compared. The results convincingly indicate that modified MR damper delivers a good and acceptable performance. The distance between damper cylinder and magnet and nos. of magnets are also varied to investigate the effect of these parameters on modified MR damper performance. These changes assist in deciding the final configuration of the modified MR damper. newlineAbstract newlineiii newlineThe force-velocity percentage difference, when different MR fluids namely AMT-Dampro and AMT-Smartech are used for the conventional and modified MR damper testing, is calculated and tabulated for performance validation. The conventional and modified MR damper results in the form of force-velocity characteristics indicate very less deviation between the two thereby validating the technology adopted for the modified MR damper. Above all, the reduced intensity of remanence phenomenon, clumping effect and heat generation are confirmed during the testing of modified MR damper. These results convincingly support the viability of modified MR damper. newlineFinally a mini and handy version of modified MR damper prototype is fabricated. This prototype is tested by varying MR fluids with different concentrations of ferromagnetic particles. The test results are used for optimization of the prototype parameters. The most suitable combination of the excitation frequency, excitation current, magnetic flux density etc. is determined. The regression analysis of the damper characteristics for most suitable MR fluid is also performed. newline

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced