Studies on microstructural and mechanical properties of fusion welded inconel 59 and aisi 904l joints

Abstract

This study investigates the microstructural and mechanical properties of dissimilar fusion-welded joints between Inconel 59 and AISI 904L, known for their exceptional corrosion resistance and ability to withstand high temperatures in extreme environments. It evaluates the compatibility and performance of four welding processes: Single Pulse Gas Metal Arc Welding (SP-GMAW), Double Pulse Gas Metal Arc Welding (DP-GMAW), Hotwire Gas Tungsten Arc Welding (HW-GTAW), and COand#8322;- based Laser Beam Welding (LBW). The study adopts a comprehensive methodology, encompassing macrostructural and microstructural evaluations through optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). Also, residual stress analysis quantifies internal stresses within the dissimilar joint. Mechanical properties are assessed through tensile, impact, and hardness testing, complemented by fractography analysis to examine fracture characteristics. The influence of deep and shallow cryogenic treatments on microstructure and mechanical properties is systematically analyzed. newlineFour welding processes were evaluated for their effectiveness in producing defect-free dissimilar welds between Inconel 59 and AISI 904L. Among them, LBW exhibited the best bead geometry and the lowest heat input. DP-GMAW achieved a narrower heat-affected zone and finer grain size, while LBW excelled with the smallest crystalline size (32.12 nm) and the narrowest HAZ (100 and#956;m to 120 and#956;m).

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced