Performance analysis of DWDM systems with optical add drop multiplexers and optical cross connects

dc.contributor.guideKaler, R. S. and Singh, Kuldip
dc.coverage.spatial
dc.creator.researcherDewra, Sanjeev
dc.date.accessioned2019-02-15T10:11:12Z
dc.date.available2019-02-15T10:11:12Z
dc.date.awarded
dc.date.completed2014
dc.date.registered
dc.description.abstractThis thesis deals with Performance analysis of Optical Add /drop multiplexers and optical Cross connects for Dense Wavelength Division Multiplexing system. It is essential to add/remove different channels in an optical communication system. The OADM provides flexibility and greater connectivity in the optical communication system. The OXC permits the system to be reconfigured on a channel by channel basis to optimize and exchange signals pattern, facilitate growth of network and increases network survivability. The sharing of system devices like OXADM, amplifiers and ROADM is permitted by the grouping of a multiple channels on a single fiber which results in cost savings. The Optical cross add drop multiplexer provides adding/dropping function and cross connecting signals similar to OADM and OXC in the optical system. Reconfigurable add drop multiplexer enables many channels which carry data to be added/dropped from optical fiber port without the need of optical-electrical-optical conversion. The designing and investigation of OXC, OADM using MZI-techniques, OADM based on FBG-circulator and ROADM based on DCE, PLC and WSS in fiber optical communication system is presented. Firstly, an optical system performance in terms of crosstalk with OADM based on MZI, MZI-semiconductor optical amplifier and MZI-FBG techniques placed at 20 km point of a 40 km link obtained at 8 × 10 Gbps with 0.1 nm channel spacing has been evaluated and found that with the MZI-FBG based OADM, the signal can be transmitted with very less bit error rate and improved Quality value whereas MZI-SOA based OADM shows the worst results. The dense WDM system with optical add drop multiplexer placed at 35 km point of a 70 km link has also been investigated and is found that MZI-FBG based OADM and OADM based on MZI provide better results with covered transmission distance (150km) at channel spacing of 0.1 nm and 10 Gbps bit rate without using DCF and amplifier. It is observed that the worst case is with the MZI-SOA based OADM.
dc.description.note
dc.format.accompanyingmaterialNone
dc.format.dimensions
dc.format.extent131p.
dc.identifier.urihttp://hdl.handle.net/10603/230097
dc.languageEnglish
dc.publisher.institutionDepartment of Electronics and Communication Engineering
dc.publisher.placePatiala
dc.publisher.universityThapar Institute of Engineering and Technology
dc.relation
dc.rightsuniversity
dc.source.universityUniversity
dc.subject.keywordDWDM
dc.subject.keywordEngineering and Technology,Engineering,Engineering Electrical and Electronic
dc.subject.keywordMZI
dc.subject.keywordOADM
dc.subject.keywordOXC
dc.titlePerformance analysis of DWDM systems with optical add drop multiplexers and optical cross connects
dc.title.alternative
dc.type.degreePh.D.

Files

Original bundle

Now showing 1 - 5 of 11
Loading...
Thumbnail Image
Name:
file10(chapter 7).pdf
Size:
114 KB
Format:
Adobe Portable Document Format
Description:
Attached File
Loading...
Thumbnail Image
Name:
file11(chapter 8).pdf
Size:
240.2 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
file1(title).pdf
Size:
19.21 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
file2(certificate).pdf
Size:
79.2 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
file3(preliminary pages).pdf
Size:
419.38 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description: