On Studies and Analysis in Synchrophrasor Assited Microgrid
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The role of the microgrid to meet up the localized power demand is of immense
newlineimportance considering the growing power demand as well as grid inadequacy in Indian
newlinepower scenario. Apart from meeting localized power demand with various Distributed
newlineGenerating (DG) sources microgrid can render support to the adjacent main grid or
newlinesimilar localized grid as when needed. This research work represents the techniques for
newlineidentifying placement sites for Phasor Measurement Units (PMUs) in a microgrid
newlinesystem based on complete observability of the system. The main objective of optimal
newlineplacement of PMU problem is to determine a optimum location of PMUs such that the
newlinewhole system is observable. A case study has been done on a 4 MW microgrid system
newlinewhich is developed with the help of the IEEE 14 bus system with the help of PSAT
newline(Power System Analysis Toolbox) software. Microgrids may operate in islanded as well
newlineas connected to a traditional power grid.
newlineIn case of poor voltage regulation encountered in a microgrid, Phasor Measurement Unit
newline(PMU) controls the tie breaker so that reactive power or VAR control may have occurred
newlinebetween the main grid and the microgrid. In this research work, A 4 MW microgrid is
newlinedeveloped with the help of the IEEE 14 bus system along with Damodar Valley
newlineCorporation (DVC) grid (a well known electrical utility operating in Eastern India) and
newlineanalyzed the system performance by Continuous Power Flow (CPF) method. A three
newlinephase short circuit fault is also introduced in the main grid and voltage profile is
newlineobserved. It is also observed that the voltage profile of the faulty system is improved
newlinewhen a microgrid is connected with that main DVC grid system. With the DVC grid
newlineconnected microgrid system, STATCOM controller is also connected with the help of
newlinePower System Analysis Toolbox (PSAT) software to improve the voltage profile of the
newlineentire system.
newlineThen Fast Fourier Transform (FFT) based Phasor Measurement Unit (PMU) is used to
newlinedetect and classify the different faults in a double