Fabrication and characterization of nanofiller reinforced dissimilar aisi 1010 steel cda 101 copper friction stir welded joints
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The impact of introducing nanofillers such as SiO2, graphene
newlinenanoplatelets (GNPs), and biochar to a weld pool of different AISI-SAE 1010
newlinesteel and CDA 101 copper was investigated in this work. The primary
newlineobjective of this research was to determine the effect of introducing
newlinecarbon-rich secondary reinforcement (biochar) as a possible reinforcement for
newlinethe Friction Stir Weld (FSW) pool of dissimilar metals and the identification
newlineof optimized process variables. The weld was performed using a modified
newlinevertical friction stir welding machine equipped with a constant axial load of
newline5 kN, a traverse speed of 30 mm/min, a rotating speed of 900 rpm, a dwell
newlineperiod of 5 seconds, and a plunging depth of 0.2 mm. To further understand
newlinethe weld quality and fusion behaviour, the prepared welds were submitted to
newlineX-ray NDT and XRD investigation. Similarly, American Society for Testing
newlineand Standards (ASTM) were used to determine mechanical qualities such as
newlinetensile strength, yield strength, percent of elongation, hardness, wear, and
newlinefatigue strength. The microstructural analysis was performed according to the
newlineprescribed protocol with appropriate pretreatment. Finally, the friction stir
newlinewelding process was improved using the Taguchi-Grey Relational Technique
newlineto determine the process variable that had the greatest influence. The X-ray
newlineNDT and XRD pictures demonstrate the fine mixing of both parent metals in
newlinethe weld nugget and interface zone, according to the findings. Proper fusion is
newlineseen in the X-ray film NDT pictures without any interface defects. Tensile
newlinestrength of FSW beads is purely determined by process factors such as tool
newlinerotation speed, weaving rate, and reinforcing effect. Tensile strength, yield
newlinestrength, and percentage of elongation were all highest in graphene
newline