removal of heavy metal ions from waste water using electrocoagulation
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
This research work focuses on the removal of chromium ions from synthetic and real wastewater by electrocoagulation process using copper. The impact of process variables such as pH, current density, supporting electrolyte concentration, chromium concentration, and electrode distance for the removal of chromium were studied. Chromium removal percentage was found to be more than 95 % using a copper electrode. Experimental results showed that the removal percentage increased with an increase in current density. The electrical energy consumption was calculated in terms of kWh/kg Cu and kWh/m3 and found that the electrical energy consumption increased with an increase in electrode distance and pH. Kinetic study of electrocoagulation process was carried out and found that chromium removal follows the first-order kinetic model with respect to different operating parameters. The rate constant increased with increasing in current density. Analysis of sludge was carried out using field emission scanning electron microscopy and energy dispersive X-ray spectroscopy, which confirmed the presence of chromium, copper hydroxide and other elements in sludge. The mass balance of chromium was carried out after electrocoagulation process. The overall mass balance shows that the chromium is the same in the residue and filtrate. Overall, copper electrode introduced for removal of chromium from synthetic and real wastewater and found good results with low energy consumption and operating cost.
newline The effect of various operating parameters such as initial Cr(VI) concentration, pH, electrode distance, current density and supporting electrolyte (NaCl) concentration for the removal of Cr(VI) from synthetic waste water were studied using copper electrode. It was found that current density of 41.32 A/m2, electrode distance of 1.4 cm, initial pH of 5.65, Cr(VI) concentration of 100 mg/L and time of electrocoagulation of 40 min are the optimal operating parameters to attain 93.33% removal efficiency of Cr(VI) from simulated waste water. The