Numerical modeling for aging investigations of lithium ion batteries
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Lithium-ion cells have higher energy, power density, and cycle life and
newlinelower cost than other chemistries. Investigations are needed to simplify the use
newlineof lithium-ion cell stacked battery packs with battery management systems
newline(BMS). BMS senses temperature, current, and voltage and provides state of
newlinecharge (SoC) and state of health (SoH) to users. Noises from sensing devices
newlinecan cause errors in measurements for larger stacked cells in battery packs. BMS
newlineengineers certainly use equivalent circuit model ECM and state estimation
newlinetechniques to address this issue.
newlineBased on literature findings, the use of composite electrodes and allied
newlineparameters for lithium ferrous phosphate cells was extracted. Physics-based
newlinemodeling (PBM) using single particle model (SPM) and pseudo-2-dimensional
newlinemodel (P2D) methods were performed with COMSOL Multiphysics for 0.5, 1,
newlineand 2 C ratings. The SPM discharge study, along with the thermal parameters
newlineof the cell, was evaluated using the Newman, Tiedemann, Gu, and Kim (NTGK)
newlinemethod with ANSYS. An actual model using model order reduction (MOR)
newlinetechniques was modeled using the Galerkin Krylov method for minimal
newlinecomputation efforts with maximum accuracy.
newlineNumerical and experimental studies of cell degradation mechanisms
newlinewere performed using PBM (SPM) with FEM. A transfer function was derived
newlineto study the growth of cell impedance by chemical kinetics parameters. The
newlineelectrochemical impedance (EIS) characteristics of the cell were investigated
newlinethrough simulation and experimental studies using Nyquist and Bode plot
newlineanalysis. The developed transfer function was reduced using Padé
newlineapproximation to minimize nonlinearities. The chemical mechanical stress
newlineanalysis was carried out using the COMSOL SPM model to evaluate the lithium
newlineconcentration in a cell under applied pulse voltage
newline