Mechanical And Thermal Characterization of Areca Kenaf Fiber Reinforced Hybrid Epoxy Composite

Abstract

Hybrid laminates made using natural fibers have been finding applications in diverse fields such as automotive parts, building structures and sports goods. These laminates incorporate the benefits of the reinforcements used in its constructions. The present work deals with the fabrication of hybrid laminate comprising of a natural fibers areca and kenaf in varying stacking sequences through hand layup method. Epoxy resin (LY556) and hardener (HY951) are mixed in the ratio of 10:1 to prepare the matrix material. Six different hybrid laminates having five layers of areca and kenaf in different stacking sequences are produced. Two more laminates having either kenaf or areca in all the five layers are produced to act as the reference laminate. newlineThe prepared laminates are cut as per ASTM standards and subjected to tensile, compressive, flexural, impact and hardness tests. Similarly, thermal properties like thermal conductivity, heat deflection temperature, coefficient of linear thermal expansion are studied. Finally, the dynamic mechanical analysis of the hybrid composites is evaluated to identify the properties of fabricated laminates. newlineThe result shows that composite made with kenaf fiber as skin material and areca as core materials exhibits better tensile, flexural and hardness properties. Likewise, composites with outer layers of areca and core layers of kenaf fibers have high compressive and impact strength. Dynamic mechanical analysis indicates that as the temperature increases the storage modulus of all the composites decreases. The loss modulus curves show that incorporating more layers of areca fibers resulted in broadening of the modulus peak. The loss modulus of the hybrid composite is decided by kenaf fiber content in the composite. The composites with less kenaf fiber content showed optimum loss modulus. newlineComposite laminates with more kenaf fiber contents absorbed less water during the water absorption test. This is because of the proper set and minimal defects between the matrix and kenaf fibers in the composite. The fractured surfaces after the mechanical tests are investigated through microstructural analysis. It is concluded that the stacking sequences influence the properties of the composite laminates. newline newline

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced