Investigations of breakdown voltage in algan gan hemts using geometry and material techniques
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
In the Power electronic market, Si-based power devices have
newlinedominated for a long time due to their well-established technology and low
newlinecost. The performance of Si-based power devices is still evolving, but
newlinenowadays the material properties of Si itself have become the fundamental
newlinelimitation. To further improve the efficiency and the power density of power
newlinesystems, bandgap semiconductors like GaN have drawn widespread attention
newlineand have proven to be an efficient technology over Si for power electronic
newlinedesigns.
newlineGaN has a wide bandgap, maximum electron velocity and large
newlineelectric breakdown field. Due to its material properties, GaN is used for
newlineapplications that operate at higher voltage, higher power density and higher
newlinetemperature. Also, GaN benefits from the large spontaneous and piezoelectric
newlinepolarization. A high concentration of Two-Dimensional Electron Gas (2DEG)
newlineis naturally formed at the GaN/AlGaN interface when GaN/AlGaN
newlineheterostructure is formed. High Electron Mobility Transistors (HEMTs) are
newlineformed because of the presence of the high density 2DEG in the GaN-based
newlineheterojunction. The 2DEG forms a conducting channel from the source to the
newlinedrain.
newlineOwing to the existence of a 2DEG channel, GaN HEMTs are usually
newlineON devices intrinsically, using the majority carrier for channel conduction
newlinewith the accumulation mode at on-state. The peak electron mobility and a
newlinehigh carrier density result in a low on-resistance and a large saturation drain
newlinecurrent; therefore, low conduction loss can be achieved while using GaN
newlineHEMTs for switching. In addition, since there is no body diode in the device,
newlinethe junction capacitance is reduced thus reducing the switching loss.
newline