Finite element analysis and validation of sic graphite hybrid aluminium metal matrix composite for resilient brake rotor component for light weight vehicle

dc.contributor.guideSutradhar, Goutam
dc.coverage.spatial
dc.creator.researcherChatterjee, Arpita
dc.date.accessioned2025-09-15T11:04:12Z
dc.date.available2025-09-15T11:04:12Z
dc.date.awarded2024
dc.date.completed2024
dc.date.registered2018
dc.description.abstractThe automobile industry places a significant emphasis on research and development efforts directed towards the creation of materials that are both lightweight and robust for use in braking systems. Conventional rotor materials have been utilised for many years, but they do not come without their share of drawbacks. One of the prime examples of these materials is grey cast iron. It is cumbersome, prone to wear, and do not perform well especially in areas where the temperature is high. The research work is about why aluminum-based hybrid metal matrix composites (MMCs) are better than conventional alloys to solve these problems. The goal of this study was to determine whether a SiC/Graphite reinforced Aluminum alloy (LM6) could be effectively used as a brake rotor material in disc braking systems. In order to do this, the composite was manufactured by a method known as stir-casting, which entails combining molten metal with a reinforcing substance during the casting step. Then the material was analyzed by subjecting it to a number of different tests, including hardness, tensile, compression, and tribological tests. The microstructure and chemical composition of the composite were then analysed using XRD, and microstructural analysis was also performed. In comparison to the conventional alloys that are used in braking systems, the results of the testing revealed that the SiC/Graphite reinforced LM6 alloy had significantly enhanced mechanical and wear resistance capabilities. Graphite present in the composite led to a considerable improvement in the material resistance to wear when subjected to high temperatures; as a result, it is now appropriate for usage in challenging environments. XRD examination confirmed the existence of Fe-Mn inter-metallic, and microstructural analysis showed that SiC was distributed in a homogeneous way throughout the manufactured MMC. These findings were consistent with the anticipation that intermetallics should present.
dc.description.note
dc.format.accompanyingmaterialCD
dc.format.dimensions30X21cm.
dc.format.extentxx,118p.
dc.identifier.researcherid
dc.identifier.urihttp://hdl.handle.net/10603/663116
dc.languageEnglish
dc.publisher.institutionDepartment of Mechanical Engineering
dc.publisher.placeImphal
dc.publisher.universityNational Institute of Technology Manipur
dc.relation
dc.rightsuniversity
dc.source.universityUniversity
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering Mechanical
dc.subject.keywordStir-Casting
dc.titleFinite element analysis and validation of sic graphite hybrid aluminium metal matrix composite for resilient brake rotor component for light weight vehicle
dc.title.alternative
dc.type.degreePh.D.

Files

Original bundle

Now showing 1 - 5 of 12
Loading...
Thumbnail Image
Name:
01_title.pdf
Size:
95.79 KB
Format:
Adobe Portable Document Format
Description:
Attached File
Loading...
Thumbnail Image
Name:
02_prelimpages.pdf
Size:
316.97 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
03_content.pdf
Size:
175.04 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
04_abstract.pdf
Size:
125.61 KB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
05_chapter1.pdf
Size:
1.1 MB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description: