Effect of Addition of Aluminium Oxide in variable concentrations on Flexural Strength and Thermal Diffusivity of Heat Polymerized Acrylic Resins

Abstract

This research study aims to study the effect of adding different concentrations by weight of untreated and treated aluminum oxide powder on the flexural strength and the thermal diffusivity of heat-polymerized acrylic resin. newlineMATERIALS AND METHODS newlineA conventional heat-cured acrylic resin was used as the matrix and aluminium oxide powder as a filler. For both the flexural strength (n=10) and thermal diffusivity (n=5) tests, separate specimens were prepared. Specimens were divided into seven groups; coded A to G. Group A was the control group (unmodified acrylic resin specimens). Specimens of the remaining six groups (B to G) were reinforced with aluminium oxide powder to achieve variable loadings of 2.5,5,10,15,20 and 25% by weight, respectively. Group B to G were coded 1 and 2 depending on whether the silane coupling agent was added or not; with 1 for non-silanized and 2 for silanized groups. newlineEach group was further coded f or t on the basis of the type of property which was evaluated; where f represented flexural strength and t represented thermal diffusivity. Flexural strength testing of rectangular specimens (64x10x3.3 mm) was done according to ADA Specification no. 12 for denture base resins using the universal testing machine. Test for thermal diffusivity was done using a method described by Watts and Smith that utilizes embedded thermocouples in cylindrical resin specimens (9x9 mm). Data obtained was put to statistical analysis. newlineOBSERVATIONS AND RESULTS newlineWhen comparing control and non-silanized groups, the highest mean flexural strength was found with group Af followed by group B1f, C1f, D1f, E1f,F1f and group G1f. When comparing the control (Af) and the silanized groups (B2f to G2f), the highest flexural strength was obtained for group B2f, followed by group C2f and then group Af. There was a decrease in flexural strength from group D2f to G2f. When comparing silanized groups (B2f to G2f) with non - silanized groups (B1f to G1f), significantly higher values were obtained for silanized groups.

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced