Replacement of Conventional Granular Material by Pond Ash in Subbase Layer of Flexible Pavement and Hardstand in Port Area

Abstract

India, the world s 2nd largest thermal power producer, generates 1200 TWh annually, fulfilling 75% of its energy needs. This produces 271 million tons of coal ash yearly, with only 77% utilized; the rest is stored in ash ponds occupying over 65,000 acres, causing environmental and health problems. The Ministry of Environment mandates 100% ash utilization, supported by initiatives like Maritime India Vision 2030 and Sagarmala, which involve port infrastructure requiring large quantities of subbase materials traditionally sourced from river sand. Strict regulations on sand mining necessitate alternatives like Non-Conventional Granular Materials (NCGM). newline newlineThis study evaluates using pond ash (PA) from West Bengal thermal plants as sand replacement in port subbase construction. Chemical (XRF, EDS, XRD, FTIR) and physical tests confirm PA s pozzolanic nature and suitability, matching MoRTH Grade V sand standards. Two PA samples mixed with sand in various proportions identified 25% PA replacement as optimal for low-volume road subbase per Ministry of Rural Development standards. newline newlineAdding 4% lime improved strength and pozzolanic activity, enabling the mix to meet heavy-duty port pavement requirements. Further inclusion of nanomaterials (Terrasil and Zycobond) significantly enhanced mechanical properties, quadrupling CBR and doubling UCS values, allowing reduced subbase thickness. newline newlineDurability tests (slake durability, wet-dry, freeze-thaw) showed high resistance; ultrasonic pulse velocity tests confirmed sample homogeneity. Numerical modeling and Light Falling Weight Deflectometer tests validated bearing capacity and resilient modulus, showing minimal difference between sand and PA blends. Pavement design with KENPAVE and IITPAVE confirmed compliance with fatigue and rutting limits, with a 43% reduction in subbase thickness and 22% cost savings compared to conventional materials. A 30 mm bituminous wearing course is recommended for surface protection. newline

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced