Design and optimization of analog low noise amplifier circuit for wireless applications
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Heterogeneous Networks (HetNets) have become an emerging
newlinetelecommunication architecture and will play an essential role in future wireless
newlinecommunication systems. Integrating satellite, aerial, and terrestrial networks
newlinerequires tailormade receiver frontend architectures. In all the receiver front ends,
newlineLow Noise Amplifiers (LNA)s are the first block that determines the overall
newlineperformance of the entire system. Therefore it necessitates the design of LNAs
newlineto provide optimal performance for fixed satellite transponders and base station
newlinereceivers for backhaul linkages.
newlineThe objective of the thesis is to design a LNA with improved
newlineperformance such as high gain, low noise, reduced nonlinearity and low power.
newlineComplementary Metal Oxide Semiconductor (CMOS) differential LNA using
newlineCurrent Reuse (CR), Capacitor Cross Coupling (CCC) and Body Bias
newlinetechniques are proposed for achievement of high gain, good linearity and low
newlinepower consumption. In order to reduce the power consumption further,
newlineFolded Cascode (FC) LNA using Complementary Current Reuse (CCR)
newlinetechnique and Diode connected Forward Body Biasing (FBB) techniques are
newlineproposed. To enhance linearity, P-MOS Inter Modulation Distortion (IMD)
newlinesinker technique is used.
newlineTo have enhanced performance at the base station receivers, a two
newlinestage pseudomorphic High Electron Mobility Transistor (pHEMT) based LNA is
newlineproposed. In this LNA design Resistive Capacitive (RC) feedback technique is
newlineused to obtain wide bandwidth and stability. Interstage network with high
newlinetransconductance device is used for gain enhancement. The prototype model is
newlinedeveloped using Low Temperature Cofired Ceramic (LTCC) in Advanced
newlineDesign System (ADS).
newline