Geopolymer concrete with fly ash and ground granulated blast furnace slag

Abstract

Since last few years, Concrete Technologists are putting in continuous efforts to minimize the consumption of Portland cement in concrete. Cement concrete is a very important and widely accepted material in the construction industry; thus, is the second highest consumed material on earth. The production of Portland cement is considered as one of the major causes of CO2 emissions apart from dust emission, non-renewable resource depletion as well as consumption of energy during its production. For a sustainable development, a need is felt to lessen or curtail the use of cement in concrete and replace the same with immensely available industrial byproducts such as fly ash and GGBS. Partial replacement has been successful and the regulations have also been formulated for incorporating the same. Research is still going on for complete replacement of cement by industrial materials that are rich in Silica and Alumina. These materials, when activated by an alkaline solution exhibit similar strength and durability properties of that of conventional cement concrete. By incorporating these materials, embodied energy, embodied carbon and embodied water are drastically reduced and concrete produced is similar to conventional concrete of lower strength grades. Present study emphasizes on complete elimination of cement and by studying potential application of fly ash and GGBS, in presence of Sodium based alkaline activators, for developing Geopolymer concrete. The strength and durability parameters were studied on cubes, cylinders and beams, cast in laboratory, from these source materials. Effect of replacing fly ash by GGBS up to 50% was also considered. Strength development through the process of polymerization had been critically studied for different molarities (2M-12M) of NaOH solution and curing under varying temperature conditions (ambient and oven). Compressive strength of cubes for each mixture was measured on 3rd, 7th, 14th, 28th, 56th and 90th day.

Description

Keywords

Citation

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced