Numerical and Experimental Investigation of Mixed mode Fracture Behavior of Basal Textured Magnesium Alloys
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Magnesium alloys are finding tremendous applications in automobile and aerospace industries owing to their low density, high specific strength, good machinability and damping characteristics. However, their structural application has been limited by low ductility, fracture toughness and poor corrosion resistance. Also, they are highly anisotropic and plastic deformation happens by slip and twinning. Numerous studies have been reported on the tensile and compressive deformation response of Mg alloys. However, their fracture behavior, especially under mixed-mode (combined modes I and II) loading is not well understood. Crystal plasticity based finite element (CPFE) simulations employing Taylor homogenization for a basal-textured Mg alloy are first performed under plane strain, small scale yielding (SSY) conditions to study crack tip fields corresponding to different elastic mode mixities Me and for two notch orientations. It is observed that with decrease in Me, there is a dramatic enhancement in the normalized plastic zone size, along with a drop in the tensile hydrostatic stress (\sigma_H). However, the plastic strain levels near the notch tip elevate significantly. It is also found that for a given Me, the notch orientation can profoundly affect the distribution of individual slip/twin activities which contribute to the equivalent plastic strain and and#61555;H around the notch tip, as well as the notch tip opening and sliding displacements. Next, a method for evaluating the contributions from mode I and II components of loading to the energy release rate J in ductile asymmetric 4-PB specimens is proposed. The method is validated by conducting elastic-plastic finite element analysis of several such specimens exhibiting a range of Me as well as for specimens having different crack length to width (a/W) ratios and strain hardening exponents. Mode I and mixed-mode fracture experiments are performed on a rolled AZ31 Mg alloy using notched 4-PB specimens along with in-situ optical imaging. Applying the method described...