Minimization of Wrinkling and Spring Back Effect During Sheet Metal forming Process Using finite Element Method
Loading...
Date
item.page.authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Sheet metal forming process is used in the automobile and aerospace industries and for the production of kitchen utensil and cold drink cans. In the present work, mathematical and finite element analysis have been performed for cylindrical cup deep drawing for two different aluminium alloys AA1050 and AA1100 at three different friction coefficients. For the finite element analysis of cylindrical cup deep drawing axisymmetric three dimensional CAD model of a complete setup such as punch, die, blank holder, and blank have been created in ANSYS, APDL. Contact174 and target170 were selected to define the friction coefficient between Blank and punch, Blank and Blank holder, and Blank and die. The value of friction coefficient between all above-mentioned parts is taken as 0.005, 0.01 and 0.02, Blank holding force for both materials has been calculated mathematically, and the velocity of punch is considered as 3 mm/sec. Results show that as the friction force increased the contact pressure force also increased, in the present work minimum contact pressure force occurs for AA1050 material. While the minimum stress produced for the same materials, hence for the better results of cylindrical deep drawing AA1050 can be used.
newlineKeywords: Deep drawing, FEM analysis, Coefficient of friction, Blank holding force, punch velocity, Punch pressure.